Volver al blog
Guías prácticas 2026-11-20 ephotoinc 0 vistas

How to Fit an Elinchrom Speed Ring on Your Softbox

How to Fit an Elinchrom Speed Ring on Your Softbox

Learn the straightforward process of attaching an Elinchrom speed ring adapter to your softbox, with compatibility checks and setup tips.

What You Need to Know Before You Start

Attaching an Elinchrom speed ring to a softbox is a straightforward task, but getting the right fit depends on a few specific details. The speed ring acts as the adapter between your strobe light and the softbox, so compatibility is key.

The Photographic Softbox Soft Box Speed Ring Speedring Adapter for Elinchrom is designed to fit standard softboxes, both rectangular and octagon boxes. It has an outer diameter of 7 5/8" (19mm) and fits 1/4" (6mm-7mm) standard rods. It is compatible with all Elinchrom strobe lights.

Step-by-Step Attachment Process

  1. Check your softbox rod diameter: Measure the rods on your softbox. The speed ring fits rods that are 1/4" (6mm-7mm) in diameter. If your softbox uses thicker or thinner rods, this adapter may not fit securely.
  2. Insert the rods into the speed ring: Align the rods of your softbox with the corresponding holes on the speed ring. The ring has an outer diameter of 7 5/8" (19mm), so the holes are spaced to match standard softbox frames. Push the rods in until they click or seat fully.
  3. Secure the speed ring to your Elinchrom strobe: The speed ring is specifically designed for Elinchrom strobe lights. Slide the ring onto the front of your strobe and twist or lock it into place using the standard Elinchrom mount mechanism. Make sure it is fully seated before attaching the softbox.
  4. Attach the softbox to the speed ring: With the rods already in the speed ring, you can now mount the softbox fabric onto the frame. Stretch the fabric over the rods and secure it according to your softbox's design. The speed ring remains attached to the strobe.

Key Specifications of the Elinchrom Speed Ring

What to Double-Check Before You Buy

Before ordering, measure your softbox rods. The speed ring fits rods between 6mm and 7mm (1/4"). If your rods are larger or smaller, you may need a different adapter. Also, confirm your softbox uses standard rod insertion—most do, but some proprietary designs may not be compatible.

The speed ring does not come with a softbox or strobe, so ensure you have both ready. The attachment process is simple, but always test the fit before a shoot to avoid surprises.

Artículos relacionados

Customer Service
Inicio
Productos
Carrito
Perfil